Superglide Stairlifts power supply
- Works during Power failure
- Battery powered Stairlift
- No mains voltage on the stairlift
- No trailing cables
- Rapid and simple installation - no mess or disruption
- Smooth and near silent operation
- 'Soft start / soft stop'
Superglide stairlifts are powered by direct current (DC) supplied by rechargeable batteries. These deliver a smooth, ultra-quiet and safe ride quality. The batteries are maintenance-free and charged by a safe 15 volt AC, which is stepped-down from the domestic mains supply with a transformer. Using this method of power for your stairlift has many advantages. If there is ever a power failure in your home your stairlift continues to function, so you will never get stranded. There is no mains voltage power to your stairlift. As the power supply is onboard the stairlift itself there is no troublesome trailing cable as you get with AC powered lifts. DC battery power gives an extremely smooth and near silent operation. It also allows us to build in a Soft start / soft stop', this means that there is no jolting or lurching as your stairlift starts or finishes its journey. This adds to the feeling of safety and stability.
Superglide Stairlifts Ride Quality
- Smoothest, quietest and most luxurious ride quality
- Unique rail profile and chassis roller system
- DC power
- Rack and pinion drive systems
- superb feeling of safety and stability
The peerless ride quality is attributed to our unique rail profile and chassis roller system working in conjunction with the DC power and rack and pinion drive systems. Typically, other stairlifts feature four, or sometimes six, chassis rollers and a box section rail. The Superglide stairlift has eight rollers, giving a surface contact area at least four times greater than competitor products. Such features, along with our unique double-tube rail profile, gives the smoothest, quietest and most luxurious ride quality currently available, and a superb feeling of safety and stability when using the stairlift.
Easy to Use
- Whisper-quiet operation.
- Simple Paddle and Infra-red remote control operation.
- 'Soft start / soft stop' technology.
- Swivel seat.
- Diagnostic digital display.
- Folding Seat.
All of the easy to use features are built into each Stairlift. Footrest means the stairs remain available for use by others when the stairlift is not in use. Due to the stairlift's DC power supply noise levels are at whisper quiet levels. The lift can be 'sent' or 'called' to wherever it is needed by using the infra-red remote control. There is no jolting or lurching as the lift starts or finishes its journey. Swivel seat with locking catch - ensures easy mounting and dismounting from the stairlift. The lift will not operate unless the seat is in the correct riding position. The diagnostic digital display mounted on the stairlift carriage shows clearly when the lift is in the normal operating position and also provides invaluable diagnostic information in the unlikely event of a fault with your stairlift.
Safe to Use
- Designed to meet BS5776-1996.
- Additional certification granted by TRL EMC.
- Pressure-sensitive safety surfaces
- Limit sensors
- Dual Electronic and mechanical braking systems
- Lockable isolation switch
- 24 Volt DC operation
Designed to meet BS5776-1996 eliminating any risk of electric shock Dual Electronic and mechanical braking systems eliminate the possibility of an uncontrolled descent. Lockable isolation switch to ensure that the stairlift always stops in the correct position. Pressure-sensitive safety surfaces that prevent the lift from colliding with any obstruction on the stairway. These are located around the footrest, and on the top and bottom of the carriage.
Easy to Maintain
- Stairlifts fit to stair treads
- Factory-prepared for installation
- No mains wiring necessary
- Maintenance free batteries
- Infra-red remote controls
Stairlifts fit to stair treads not to the wall. Because we use our own fully trained Installation Engineers, the process is quick, clean and simple. Factory-prepared for installation - each stairlift is individually built to the dimensions of your own staircase. No mains wiring necessary - there's no need for expensive and disruptive alteration to the domestic mains power supply, or for a certified electrician to connect main power. Maintenance free batteries - power for the lift is derived from 2 x 12 volt batteries charged via an independent transformer. Infra-red remote controls - no complicated wiring for the lift call stations.